Breeze decorative plaster with wire effect is a decorative coating that can be used to create different decorative surfaces depending on the installation technique.
Seamless, durable and stylish decorative coating - effortless end result thanks to easy application and quick drying.
Areas of application: Indoors in rooms with normal loads. Suitable for use on prefabricated mineral substrates (concrete, cement and plasterboard) and chipboard.
Preparing the platform:
1. The surface to be installed must be clean, dry, solid and white. Old coatings, dirt, dust, chalky substrates (liming, lime) must be cleaned mechanically. Shiny surfaces (old oil paint and enamel) must be roughened with sandpaper and then cleaned of dust. Fill cracks, holes and unevenness.
Attention. BREEZE is a thin-layer decorative coating, so it does not completely cover the unevenness of the base!
2. Treat the base with SILK PLASTER Primer, it makes it easier to apply the decorative coating later because it contains a roughening agent. Let dry according to the instructions.
Material preparation:
3. Mix the mortar thoroughly with the beater of the drill, at low speed.
4. Apply the BREEZE decorative coating with a plastic spatula. The application is done with light smoothing movements without pressure. When applying, it is necessary to clean the trowel in between to remove excess material.
The smoothing direction of the material affects the final appearance of the material.
When applying, it is necessary to observe the evenness and thickness of the layer over the entire surface, avoiding the appearance of streaks and gaps. The thickness of the layer can be up to 0.5 mm.
6. The decorative material BREEZE must be applied from corner to corner at once.
Always work with a "wet" edge, do not let the material dry, so that there are no seams on the surface.
Tool: Plastic spatula
Coating drying time: 3 hours, touch resistant at 20°C temperature and 60% relative humidity. Complete drying - 24 hours. Final strength: 5-7 days.
Consumption, m² / kg: ~ 2.5 - 3 m² / 1 kg; depends on the substrate and installation thickness.
Operating conditions: Operating temperature (air, base, materials) +5 to + 35 ° С. The relative humidity of the air is up to 65%.
Composition: Acrylic copolymer dispersion, water, decorative fillers, processing agents, formaldehyde-free preservatives.
Shelf life: unopened in original packaging - 24 months.
Safety measures: The material is fire- and explosion-proof. Avoid contact with the skin and protect the eyes. If the substance gets into the eyes, rinse with plenty of clean water and seek medical attention. The use of gloves and protective clothing is recommended.
Transport and storage: Store in a cool, dry place, out of reach of children, tightly closed. Transport and storage temperature is + 5 ° С to + 35 ° С.
Up to five cycles of freezing and thawing of the material (cycle -maximum 1 day) are allowed at temperatures of -30 °C or one freezing at temperatures of -30 °C, but for a maximum of 14 days. Thawing must be performed without heating devices. Stir well after thawing.
Disposal: Dispose of empty containers as household waste in accordance with local regulations.
Recommendations:
! Before applying the BREEZE decorative coating, it must be checked that the color of the material matches the order.
Important! Perform a test coat on the surface where the application of the material will continue.
The material may differ slightly from the sample in the catalog and from batch to batch. It is recommended to mix materials from different batches together.
Neither the manufacturer nor its authorized representatives shall be liable for any loss arising from the misuse of its materials.
